Spot UV curing systems

BLUEWAVE 50, low cost UV spot curing system

Low cost and very simple the BlueWave 50 is ideal for efficient cure of adhesives, encapsulants and coatings( UV and visible).

Main characteristics :

UV Initial intensity : 3000mW/cm² at 365 nm
Liquid filled light guides single or multi-pole, with various lengths
Useful life of the lamp: 2000 hours warranty , expected 4000 hours
Digital LCD timer, shutter manual or activated by wtih foot switch or PLC

To Search on our online database of MSDS and TDS, please register and you will receive your username.

BLUEWAVE 200, spot curing lamp

For those who are looking for power and simplicity, the BlueWave 200 UV curing spot lamp is the perfect user-friendly and reliable UV curing system adhesives, encapsulants and coatings( UV and visible).

Main characteristics :

UV Initial intensity : 17000mW/cm² at 365 nm, with manual intensity adjusment up to 100%
Liquid filled light guides single or multi-pole, with various lengths
Useful life of the lamp: 2000 hours
Digital LCD timer up to 99,99 seconds, with foot switch or PLC

To Search on our online database of MSDS and TDS, please register and you will receive your username.

LC8, spot light source

Spot light source LC8, a high performance UV spot source for precise curing of our UV reactive adhesives and compounds, NOA and OAD series , in the range of 280 to 450nm

You will appreciate:

Long service life guaranteed of 3000 h with its mercury-senon lamp
UV intensity of 4500mw/cm² at 365nm .
Selectable wave length and light intensity adjustable from 1 to 100%
Memory avalaible for 9 types of 7-step programs
various UV filters availaible
Selectable positions of light guide port, various light guides available from single type up to 6-furcated type

To Search on our online database of MSDS and TDS, please register and you will receive your username.

ELC-410 UV - ELC410T Hand Held Systems

The compact and rugged design of the ELC-410 makes it an ideal spot curing system to resolve a number of assembly applications in the electronic, medical device, and telecommunications industry. With its lightweight, 10ounce hand-piece, and 360 degree swiveling light guide, the ELC-410 will help resolve the most complex, geometrically challenged application. The ELC-410 and 410-T deliver 90mW/cm2 at 300 to 400nm and are available in both Ultraviolet and visible light spectrums.

ELC-410 Standard Unit: After an initial trigger pull, the curing light and fan will turn on and a clear audible tone will sound at 10 second intervals. At the second trigger pull, the light will turn off and the tones will cease.

ELC-410T Equipped with Optional Timer: A rotary select timer permits the operator to choose exposure times of 10, 20, 30, 40, or 50 seconds plus a “C" setting for continuous operation. The exposure cycle is initiated by depressing the trigger switch. Any cycle can be interrupted by depressing the trigger switch a second time.

Specifications:

UV Intensity: 90 mW/cm2 @ 365nm
Input V/W 120V, 220/240V 50/60Hz, 75 W